What to do if Quietside Air Conditioner doesn't turn on?
If your Quietside air conditioner isn't responding after being powered on, ensure the power plug is securely connected. If the connection is firm and it still doesn't respond, replace the controller fuse. If the issue persists, the transformer may be faulty and require replacement.
Why is my Quietside Air Conditioner remote not working?
If your Quietside air conditioner remote controller isn't sending signals, first check the remote controller itself for any issues. Also, check the receiver connection and its wiring. If the receiver's installation and wiring are correct, replace either the receiver or the remote controller.
How to fix Quietside Air Conditioner breaker that trips immediately?
If your Quietside Air Conditioner breaker trips immediately when turned on, first check the power supply circuit. If the circuit or a part of the air conditioner is malfunctioning, measure the insulation resistance or identify and fix the specific issue. If the breaker itself is faulty, replace it.
Why does my Quietside Air Conditioner breaker trip after a few minutes?
If your Quietside Air Conditioner breaker trips after a few minutes, it indicates a malfunction in the circuit or a component of the air conditioner. To resolve this, measure the insulation resistance or systematically troubleshoot to identify and fix the faulty part. If the breaker itself is defective, replace it.
How to stop Quietside Air Conditioner from leaking water?
If you notice water leakage from your Quietside Air Conditioner, inspect the drainage pipe for blockages or damage; replace the pipe if necessary. Also, check the refrigerant pipe joint's wrapping and re-wrap it tightly if it's loose.
Why is my Quietside Air Conditioner making abnormal sounds?
If your Quietside air conditioner is making abnormal sounds, check if the indoor unit's fan is contacting other parts and adjust its location if needed. Also, check for any touching pipelines on the outdoor unit and separate them. Inspect the inner plates and tighten any loose screws, or stick absorbing clay between the plates. Finally, check the louver of the outdoor unit and adjust its position if it's touching the outer case.
What to do if Quietside Air Conditioner power voltage is too low?
If the voltage is too low, check the cause and improve the power supply condition. Consider adding a stabilized voltage power supply if the voltage is lower than 10% of the rated voltage.
What to do if Quietside Air Conditioner compressor runs but the outdoor fan doesn't?
If, in cooling or heating mode, the compressor of your Quietside Air Conditioner runs but the outdoor fan does not, check the wiring connections against the circuit drawing and correct any errors. If the connections are correct, the outdoor fan capacitor may be damaged and require replacement.
How to fix Quietside Air Conditioner indoor fan motor?
If the indoor fan motor in your Quietside Air Conditioner is burned, broken, or the heat protector has malfunctioned, replace the fan motor or the defective part.
General| Brand | Quietside |
|---|---|
| Model | QS12-VJ115 |
| Category | Air Conditioner |
| Language | English |
Provides detailed technical specifications for the indoor and outdoor units.
Displays performance curves, capacity variations, noise levels, and rated frequency data.
Presents dimensional drawings and measurements for indoor and outdoor units.
Illustrates the flow of refrigerant through the indoor and outdoor units.
Depicts wiring diagrams and PCB layouts for the indoor and outdoor units.
Explains the functions and usage of the remote controller's buttons and display icons.
Details the operational characteristics of various modes like cooling, heating, dry, and fan.
Provides a flowchart for diagnosing and resolving common operational issues.
Lists error codes, their display methods, and potential causes for system malfunctions.
Guides through diagnosing and fixing major faults like capacitor, IPM, and compressor issues.
Presents exploded views and parts lists for both indoor and outdoor units.
Provides step-by-step instructions for disassembling the indoor and outdoor units.
Includes temperature conversion tables and connection pipe guidelines.
Details pipe expanding techniques and ambient temperature sensor resistance data.
To Next Page
