9
will hear a warning tone from the headset. By
re-pressing and re-holding “MFB” 2 seconds during the
voice dial mode, voice dial will be cancelled.
Note: Please refer to the manual of your mobile phone
for voice-command dial support.
Connect with 2 mobile phones or devices
A. Disconnect the Bluetooth device from your phone or
Bluetooth devices if it is already connected.
B. Press MFB to put the headset in pairing mode.
C. Turn on and search Bluetooth device on your second
phone or Bluetooth device until you nd
“CrossTrainer PRO” and select to begin pairing.
D. Reconnect with your rst device.
To Next Page
Loading...