3.17 Web server
The controllers
have a built-in web server that allows direct connection to a PC via a local area network (LAN).
This allows to consult certain data and settings via the PC instead of via the display of the controller.
Getting started
Make sure you are logged in as administrator.
• Use the internal network card from your computer or a USB to LAN adapter (see picture below).
USB to LAN adapter
• Use a UTP cable (CAT 5e) to connect to the controller (see picture below).
Configuration of the network card
• Go to My Network places (1).
Instruction book
70 2920 1818 00
To Next Page