To Next PageTo Next Page
Need help?Do you have a question about the Quincy Compressor QT-10 and is the answer not in the manual?
General| Model | QT-10 |
|---|---|
| Horsepower | 10 HP |
| Phase | 3 |
| Max Pressure | 175 PSI |
| Tank Size | 120 Gallon |
| Configuration | Vertical |
| Pump Material | Cast Iron |
Summarizes modifications made to the manual since its previous printing.
Explains QT/QTS series overview, compression cycles, lubrication, cooling, and dryer/filter principles.
Outlines steps for receiving equipment and handling freight damage.
Specifies location requirements and details electrical specifications and safety precautions for installation.
Covers mounting, components, air intake/discharge systems, pressure vessels, and condensation management.
Covers the pre-start checklist, initial startup, break-in, and daily operation procedures.
Details the maintenance schedule, safe shutdown, lubrication, and pulley/belt adjustments.
Provides procedures for adjusting pressure switches, pilot valves, and servicing reed valves.
Lists common issues like low pressure, vibration, belt wear, oil pressure, and their probable causes.
Covers air pressure issues, overheating, knocks, oil consumption, starting failures, and motor stalls.
Diagrams showing the correct placement of various safety, maintenance, and identification decals on the unit.
