EasyManua.ls Logo

Quincy Compressor QT-7.5 User Manual

Quincy Compressor QT-7.5
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
This manual contains important safety information and must be
carefully read in its entirety and understood prior to installation
by all personnel who install, operate and/or maintain this product.
On-line product registration, parts ordering and warranty information is available at www.quincycompressor.com
THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS INCLUDING LEAD,
WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER
AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. FOR MORE
INFORMATION GO TO WWW.P65WARNINGS.CA.GOV
Manual No. 2022208700
September 2018 Edition
QT and QTS Series
Compressors
Instruction Manual
Question and Answer IconNeed help?

Do you have a question about the Quincy Compressor QT-7.5 and is the answer not in the manual?

Quincy Compressor QT-7.5 Specifications

General IconGeneral
BrandQuincy Compressor
ModelQT-7.5
CategoryAir Compressor
LanguageEnglish

Summary

Safety

Safety First

Explains safety concepts, hazard definitions (DANGER, WARNING, CAUTION), and general precautions.

Installation

Receiving Delivery and Freight Handling

Outlines steps for inspecting equipment, handling damage, and claiming damages.

Electrical Supply Requirements

Details electrical connection requirements, including codes and voltage checks.

Start-Up & Operation

Pre-starting Checklist

Lists crucial steps to perform before connecting the unit to a power source.

Initial Startup and Daily Checks

Guides on initial startup, break-in, monitoring, and essential daily operational checks.

Maintenance & Lubrication

Stopping for Maintenance

Provides essential safety procedures for stopping the compressor for maintenance or service.

Lubrication Specifications

Details lubricant level checks, types, and specifications for Quincy compressors.

Pulley/Sheave Alignment and Belt Tension

Explains the importance of alignment and provides belt tension setting procedures.

Troubleshooting

Common Compressor Issues

Lists potential causes for low discharge pressure, water in crankcase, rusty parts, and excessive vibration.

Consumption, Electrical, and Starting Problems

Discusses excessive oil consumption, current draw, starting failures, and motor stalls.

Related product manuals