To Next PageTo Next Page
Need help?Do you have a question about the Quincy Compressor QSI 370 and is the answer not in the manual?
General| Model | QSI 370 |
|---|---|
| Type | Rotary Screw |
| Phase | 3 |
| Voltage | 460V |
| Motor Speed | 1800 RPM |
| Sound Level | 76 dBA |
| Pump Type | Rotary Screw |
| Drive Type | Direct Drive |
| Max Pressure | 125 PSI |
| Operating Pressure | 100-125 psig |
Details the warranty terms, coverage, and exclusions for Quincy compressors and parts.
Explains the meaning and severity of different safety symbols used in the manual.
Lists essential safety measures for operating and maintaining the compressor.
Explains the purpose and importance of properly sized and installed pressure relief valves.
Essential checks and preparations required before operating the compressor for the first time.
Step-by-step guide on how to safely start the compressor and what to observe during initial operation.
Explains how to set and modify pressure bands and other operational parameters.
Guides on programming time-based start/stop commands and changing pressure bands for the compressor.
Describes the mode that reduces compressor capacity in steps for energy saving.
Outlines critical procedures for safely preparing the compressor for maintenance or service.
General safety procedures and precautions for service personnel working on the compressor.
Explains Quincy's fluid analysis service for optimizing drain intervals and machine protection.
Tables detailing the properties and acceptable ranges for QuinSyn PG, XP, and Plus fluids.
Instructions for adjusting the differential pilot valve to set modulation pressure.
Guidance on adjusting the pressure switch for compressor loading and unloading points.
Procedures for checking and correcting coupling alignment between the compressor and motor for optimal bearing life.
Lists common causes for the compressor failing to start and their corrective actions.
Identifies reasons for unexpected compressor shutdowns and how to resolve them.
Discusses causes for reduced air output and troubleshooting steps.
Explains potential issues causing low pressure in the receiver and their solutions.
Addresses causes of overheating and fluid temperature issues and their remedies.
Explains common reasons for separator clogging and how to fix them.
Identifies causes for frequent fluid filter clogging and solutions.
Discusses potential causes for high fluid consumption and troubleshooting steps.
Identifies reasons for air cleaner clogging and how to resolve them.
Addresses issues with the inlet valve's response to air demand and how to correct them.
Troubleshooting steps when the compressor fails to unload during periods of no air demand.
Explains why the compressor might not time out or shut down when unloaded in Auto/Dual mode.
Provides a schedule of recommended maintenance tasks based on time intervals.
Provides a final checklist for ensuring safe installation and operation of the compressor package.
