Quincy Compressor QSI 1000 User Manual

THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS INCLUDING LEAD,
WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER
AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. FOR MORE
INFORMATION GO TO WWW.P65WARNINGS.CA.GOV
QSI Series
Fixed Speed Rotary Screw Air Compressors
Instruction Manual
This manual contains important safety information and should be
made available to all personnel who operate and/or maintain this
product. Carefully read this manual before attempting to operate or
perform maintenance on this equipment.
Manual No. 2012203803
August 2018 Edition

Quincy Compressor QSI 1000 Specifications

General

Brand	Quincy Compressor
Model	QSI 1000
Category	Air Compressor
Language	English

Summary

Section I - General

Standard Warranty

Outlines the terms, conditions, and limitations of the product warranty.

Safety Alert Symbols and Precautions

Explains hazard symbols and critical safety measures for operation.

Section II - Description

General Description

Provides an overview of the QSI compressor's design and components.

The Compression Cycle

Explains the step-by-step process of air compression within the unit.

Capacity Control System

Details how the compressor regulates its output based on demand.

Section III - Installation

Receiving and Moving the Unit

Location and Piping Connections

Guidance on selecting an appropriate site and making proper air and fluid connections.

Relief Valves, Electrical, and Guards

Manual Vent, Water/Sewer, and Rotation

Section IV - Operating Procedures

Pre-Operation Checks and Startup

Steps to perform before starting the compressor and the startup sequence.

Compressor Operation and Shutdown

Control Panel Overview

Understanding Control Panel Icons

Menu Navigation and Functions

Inputs and Outputs Monitoring

General Settings and Customization

Network and Control Modes

Section V - Maintenance or Service Preparation

Important Maintenance Requirements

Outlines essential procedures for safely preparing the unit for maintenance.

Section VI - Servicing

Safety During Servicing

Critical safety precautions to be followed by service personnel.

Air/Fluid Separator Element Servicing

Shaft Seal Replacement

Section VII - Compressor Fluids

Fluid Specifications and Types

Details recommended fluids, their properties, and applications.

Lubrication and Fluid Level Management

Fluid Sampling and Analysis

Procedures for taking fluid samples and understanding analysis reports.

Cleaning and Flushing Procedures

Fluid Parameters and Specifications

Section VIII - Service Adjustments

Differential Pilot Valve and Pressure Switch Adjustments

How to adjust pressure settings for optimal compressor operation.

Drive Coupling Alignment

Section IX - Troubleshooting

Troubleshooting Guide

Comprehensive guide to diagnosing and resolving common operational issues.

Section X - Maintenance Schedule

Recommended Maintenance Schedule

Lists routine maintenance tasks and their recommended intervals.