To Next PageTo Next Page
Need help?Do you have a question about the Quincy Compressor QSI 245 and is the answer not in the manual?
General| Model | QSI 245 |
|---|---|
| Horsepower | 5 HP |
| Maximum Pressure | 175 PSI |
| Tank Size | 80 Gallon |
| Voltage | 208-230/460V |
| Drive Type | Belt Drive |
| Phase | Three Phase |
Details the warranty terms and conditions for Quincy compressors, including coverage and exclusions.
Explains the meaning of various safety symbols used throughout the manual to indicate hazards.
Outlines essential safety measures to be followed during operation and maintenance of the compressor.
Provides an overview of the QSI compressor, its components, and general features.
Details the step-by-step process of air compression within the rotary screw compressor.
Explains how the compressor regulates its output based on air demand.
Recommendations for selecting an appropriate installation site for the compressor.
Explains the function and installation requirements for pressure relief valves.
Guidelines for the safe and correct electrical installation of the compressor.
Essential checks and preparations required before starting the compressor.
Step-by-step guide for safely starting the compressor unit.
Procedures for normal and emergency stopping of the compressor.
Description of the control panel, its parts, functions, and interface elements.
General procedures and safety precautions before performing maintenance or service.
Key requirements for maintaining the compressor, including using genuine parts and intervals.
General safety precautions for service personnel working on the compressor.
Lists recommended synthetic fluids for Quincy rotary screw compressors.
Overview of the fluid analysis program for optimizing drain intervals and machine protection.
Table detailing fluid properties, test methods, and acceptable ranges for various fluids.
Instructions for adjusting the differential pilot valve for pressure modulation.
Guidance on setting the pressure switch for compressor loading and unloading points.
Steps for checking and correcting the coupling alignment between the compressor and motor.
Lists common probable causes and corrective actions for compressor operational issues.
Provides a schedule for routine maintenance tasks based on time intervals.
Presents detailed technical specifications for various QSI compressor models.
