To Next PageTo Next Page
Need help?Do you have a question about the Quincy Compressor QSB 25 HP and is the answer not in the manual?
General| Horsepower | 25 HP |
|---|---|
| Max Pressure | 175 PSI |
| CFM at 100 PSI | 100 CFM |
| Voltage | 230/460 V |
| Phase | 3 |
| Tank Size | 120 Gallons |
Specifies suitable installation locations, clearances, and environmental considerations.
Checklist of essential pre-operation tasks and safe startup procedures.
Essential safety steps before performing maintenance or service on the compressor.
General safety guidelines for technicians and procedure for water removal.
Inspection, replacement, and installation procedures for the compressor shaft seal.
Detailed steps for collecting fluid samples and understanding the analysis report.
Tables listing acceptable ranges for various fluid parameters for different fluids.
Diagnosing common causes for failure to start, unscheduled shutdowns, and overloads.
Troubleshooting low air delivery, low receiver pressure, and high receiver pressure.
Addressing high discharge temperatures, separator clogging, and fluid contamination.
Diagnosing issues with blowdown valves, fluid filters, consumption, and fluid breakdown.
Troubleshooting air cleaner clogging and inlet valve operation related to air demand.
Addressing problems with compressor unloading, timers, and excessive water in air.
Diagnosing premature belt failure, turnover, stretching, and general wear issues.
Schedule of recommended maintenance tasks based on operating intervals (daily, monthly, yearly).
