To Next PageTo Next Page
Need help?Do you have a question about the Quincy Compressor QSB/T 30 and is the answer not in the manual?
General| Model | QSB/T 30 |
|---|---|
| Horsepower | 30 HP |
| Maximum Pressure | 175 PSI |
| Stages | 2 |
| Air Delivery | 120 CFM |
| Voltage | 230/460 V |
| Phase | 3 |
| Type | Reciprocating |
| Sound Level | 75 dB |
| Pressure Unit | PSI |
Explains hazard identification symbols used throughout the manual for critical safety warnings.
Lists essential safety rules for operating and maintaining the compressor system.
Guidelines for inspecting the unit upon arrival and preparing the installation site.
Specifies ideal placement and environmental conditions for compressor installation.
Instructions for connecting piping, installing relief valves, and pressure vessels.
Detailed checklist of actions required before starting the compressor for the first time.
Methods for stopping the compressor normally or in an emergency, and using electronic controls.
Essential safety steps to follow before performing any maintenance or service on the unit.
General safety guidelines for servicing and procedures for removing condensate.
Instructions for testing and replacing air/fluid separator elements and air filters.
Information on inspecting and troubleshooting the compressor shaft seal.
Step-by-step guide for correctly installing a new compressor shaft seal.
Key factors and procedures for maintaining the V-belt drive system for optimal performance.
Procedures for replacing belts and adjusting tension on 15-30 HP units.
Recommended Quincy synthetic fluids and their properties for QSB/T compressors.
Details on the lubrication system and how to check the fluid level.
Information on fluid filter replacement intervals and factors affecting fluid longevity.
Common causes and corrective actions for compressor start-up issues.
Troubleshooting steps for unexpected shutdowns and thermal overload trips.
Addressing high discharge air or fluid injection temperatures.
