4 Installation
4.1 Dimension drawings
The dimension drawing can be found in the technical documentation, supplied with the unit.
Dimension drawing Model
9828 5102 38–01 QGD 40, QGD 50, QGD 60 without integrated dryer, metric units
9828 5102 38–02 QGD 40, QGD 50, QGD 60 without integrated dryer, imperial units
9828 5102 39–01 QGD 40, QGD 50, QGD 60 with integrated dryer, metric units
9828 5102 39–02 QGD 40, QGD 50, QGD 60 with integrated dryer, imperial units
Text on drawings Translation or Explanation
Cooling air outlet of compressor Cooling air outlet of compressor and motor
Air inlet of compressor Cooling air inlet of compressor and motor
Compressed air outlet Compressed air outlet connection
Electrical cable passage Electrical cable passage
Cooling air outlet of cubicle Cubicle cooling air outlet
Doors fully open Dimensions with doors fully open
Cooling air inlet of dryer Dryer cooling air inlet
Cooling air outlet of dryer Dryer cooling air outlet
Centre of gravity Centre of gravity
Approx. mass Approximate mass of the machine
Manual drain of after cooler Manual drain, aftercooler
Automatic drain of after cooler Connection of the automatic drain of the aftercooler
Manual drain of dryer Manual drain of the dryer
Automatic drain of dryer Connection of the automatic drain of the dryer
Mounting holes of compressor Mounting holes to fixate the compressor
4.2 Installation proposal
Safety
The operator must apply all relevant safety precautions, including those mentioned in this
book.
Instruction book
2920 7190 02 65
To Next Page
Loading...
Need help?
General
