Quincy QGS 20 - User Manual

ENGLISH
Cod. 9828093237 01 ed. 02/2023 - 1
MANUAL USE AND MAINTENANCE
SILENCED SCREW ROTARY COMPRESSOR UNITS
QGS 20 - 25 - 30 - 40
WARNING: ALWAYS WAIT FOR FIVE MINUTES BEFORE REMOVING THE FRONT COVER (INSTRUMENT PANEL).
USE A SPECIFIC INSTRUMENT TO CHECK THAT THERE ARE NO DANGEROUS VOLTAGES BEFORE PERFORMING
OPERATIONS ON THE MOTOR.
CONTENTS
PART A: INFORMATION FOR THE USER
PART B: INFORMATION RESERVED FOR TECHNICALLY SKILLED
PERSONNEL
1.0 GENERAL CHARACTERISTICS
20.0 STARTING UP
2.0 INTENDED USE
21.0 GENERAL ORDINARY MAINTENANCE REQUIRES
TRAINED PERSONNEL
3.0 OPERATION
22.0 CHANGING THE OIL
4.0 GENERAL SAFETY STANDARDS
23.0 CHANGING THE OIL SEPARATING FILTER
5.0 DESCRIPTION OF DANGER SIGNALS
24.0 BELT TENSION
6.0 DANGER ZONES
25.0 REPLACING THE ELECTRIC MOTOR
7.0 SAFETY DEVICES
26.0 OLEOPNEUMATIC DIAGRAM
8.0 POSITION OF PLATES
27.0 CALIBRATIONS FOR DRYER
9.0 COMPRESSOR ROOM
10.0 TRANSPORT AND HANDLING
IMPORTANT: A COPY OF THE WIRING DIAGRAMS CAN BE FOUND
INSIDE THE ELECTRIC PANEL OF THE COMPRESSOR.
11.0 UNPACKING
12.0 INSTALLATION
13.0 DIMENSIONS AND TECHNICAL DATA
14.0 MACHINE ILLUSTRATION
15.0 ORDINARY MAINTENANCE TO BE DONE BY THE USER
16.0 PERIODS OF INACTIVITY
17.0 SCRAPPING THE UNIT
18.0 LIST OF SPARE PARTS FOR ROUTINE MAINTENANCE
19.0 TROUBLE-SHOOTING AND EMERGENCY REMEDIES
Codice
9828093237
01
Date 02/2023
THIS MACHINE MUST BE CONNECTED TO TWO DIFFERENT POWER
SUPPLIES: THREE-PHASE SUPPLY FOR THE COMPRESSOR SINGLE-
PHASE SUPPLY FOR THE DRYER
READ THIS MANUAL CAREFULLY BEFORE CARRYING OUT ANY OPERATIONS ON THE COMPRESSOR UNIT.

Quincy QGS 20 Specifications