To Next PageTo Next PageWhat to do if QUINN Power Tool display shows instead of saving torque or angle measurements?
If the QUINN Power Tool wrench displays shows instead of saving torque or angle measurements, it means that the wrench has no available memory. To resolve this, delete previously saved measurements to allow new measurements to be saved.
Why does my QUINN 64915 display continue to flash?
If the display of your QUINN Power Tool continues to flash, it indicates that the wrench moved or the anvil turned while preparing for angle measurement. Ensure the wrench is resting on a stable surface, then press the button to try angle measurement preparation again.
How to fix QUINN Power Tool when display will not turn on or display is dim?
If the display of your QUINN Power Tool will not turn on or is dim, it's likely due to low battery power. Install new or recharged batteries, ensuring they are placed in the correct polarity. Avoid mixing alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
Guidance on inserting AA batteries into the torque wrench for power.
Overview of the buttons and display indicators on the torque wrench.
Configures the wrench to track maximum torque or hold the peak value.
Allows selection of the desired unit for angle measurement.
Enables viewing and managing previously recorded measurements.
Check for loose hardware, misalignment, or cracked parts before operating.
Wipe the wrench with a clean cloth; avoid liquids.
Requires professional calibration and servicing every six months.
Remove batteries prior to storing the wrench.
Resolving issues indicated by error codes like Er4 or Er5.
Addressing problems with dim displays or the display not turning on.
Troubleshooting when the wrench cannot save torque or angle measurements.
General| Brand | QUINN |
|---|---|
| Model | 64915 |
| Category | Power Tool |
| Language | English |
