Qviart COMBO - Installation; Satellite; Terrestrial; Factory Default

5
23.:Fast forward.
24.:Play.
25./USB:stop function.
26
.I:Previous.
27.I:Next.
28.||:Paus
e playǃ
timeshift function
29.:Record.
III. Installation
You should installation the receiver when powering on your product for the first
time after purchase.
Note:The default password is 0000.If you have forgotten your
password,please contact your local product distributor.
Main menu
Press the MENU button when you exit all menu,highlight the option which you
want to operation,press OK button.
Highlighted to Installation,press the OK button to enter into the installation
menu.In Installation menu,you can make antenna setting,Factory Default and
so on.
3.1 Satellite
$QWHQQD6HWWLQJV
Antenna Setting allows you to configure the antenna setting parameters.
86$/66HWXS
If you set the Motor Mode to USALS,you need set the longitude and the
latitude in USALS Setup.
3.2 Terrestrial
Menu->Installation->Terrestrial
Terrestrial allows your searching the area channel according to your choice.
3.3 Factory Default
You can restore the product to the factory default and you can also setup it
according to the wizard