Need help?Do you have a question about the QYT KT-8900D and is the answer not in the manual?
General| Modulation Type | FM |
|---|---|
| Operating Voltage | 13.8V DC ±15% |
| Squelch | Carrier/CTCSS/DCS |
| Operating Temperature | -20°C to +60°C |
| Frequency Range | VHF: 136-174MHz, UHF: 400-480MHz |
| Channel Capacity | 200 channels |
| Channel Spacing | 25KHz/12.5KHz |
| Weight | 448g |
Check packaging for damage, confirm received items, and contact dealer if damaged or lost.
Details the buttons, knobs, and connectors on the front of the mobile radio unit.
Details the ports located on the rear of the mobile radio unit, including connectors and inputs.
Explains the functions of the keys on the handheld microphone accessory.
Explains the icons and display elements shown on the mobile radio's LCD screen.
Provides essential information about selecting, grounding, and using antennas with the mobile radio.
Describes how to enable/disable keypad lock and toggle power levels using the #/LOCK key.
Explains the functions of the * key for reverse function and scanning.
Instructions on how to power on and off the mobile radio using the volume knob.
Guides on adjusting the radio's volume using the volume knob and monitor function.
Explains how to make calls and select between Frequency (VFO) and Channel (MR) modes.
Explains how to toggle between VFO and MR modes to monitor frequencies and channels simultaneously.
Provides a summary of key menu settings, including TMR, STEP, SQL, TXP, SCR, TOT, and APO.
Details specific menu items like TMR, STEP, SQL, TXP, showing their functions and selectable options.
Explains the differences and usage of Frequency (VFO) and Channel (MR) modes for programming.
Covers toggling power levels and storing FM radio stations and scanning.
Instructions to enable/disable the keypad lock function by holding the #/LOCK key.
Steps to configure PTT-ID settings, including signal mode, transmission timing, and delay.
Details DTMF RX/TX settings and their common use in two-way radio systems.
Explains DTMF Remote Stun and Remote Kill functions for managing radio capabilities.
Guides on configuring DTMF, 2TONE, and 5TONE signaling for receiving and transmitting.
Explains how to set up and use different scanning modes: Time, Carrier, and Search.
Details general technical parameters like frequency range, memory channels, stability, and dimensions.
Provides detailed receiver performance metrics like sensitivity, channel choice, and audio response.
Lists transmitter performance metrics including output power, modulation mode, and audio response.
To Next Page
