QYT KT-8900D User Manual

GETTING STARTED | 7

Color Display and Icon Descriptions
The Top Line on the LCD will show the current selected channel’s settings at a glimpse:
Current Channel Setting
Current Selected Channel
Selection in Menu
(applies to current selected channel)
Icon
Description
Icon
Description
Icon
Description
Channel allowed to TX & RX
DCS
DCS Enabled (TX,RX or Both)
+
Positive Off set (Freq. Mode)
Channel allowed to RX Only
L
Transmit Power: Low
-
Negative Off set (Freq. Mode)
Channel allowed to TX Only
H
Transmit Power: High
±
Off set Enabled (Chan. Mode)
Channel disabled to TX or RX
2T
2Tone Calling Enabled
N
Channel set to Narrowband
Keypad is Locked
5T
5Tone Calling Enabled
W
Channel set to Wideband
CT
CTCSS Enabled (TX, RX or Both)
DT
DTMF Calling Enabled
R
Channel Reverse Enabled
Battery Strength (Weak Battery Indicator)

QYT KT-8900D Specifications

General

Modulation Type	FM
Operating Voltage	13.8V DC ±15%
Squelch	Carrier/CTCSS/DCS
Operating Temperature	-20°C to +60°C
Frequency Range	VHF: 136-174MHz, UHF: 400-480MHz
Channel Capacity	200 channels
Channel Spacing	25KHz/12.5KHz
Weight	448g