Need help?Do you have a question about the R.M. Young 05305L and is the answer not in the manual?
Details the purpose and design of the Wind Monitor for air quality applications, highlighting its accuracy and sensitivity.
Lists range, sensor type, distance constant, threshold sensitivity, and output signal for wind speed measurement.
Details range, sensor type, damping ratio, delay distance, threshold sensitivity, and output signal for wind direction.
Covers power requirements and operating temperature range for the instrument.
Instructions for checking the Wind Monitor for shipping damage and verifying mechanical and electrical integrity.
Guidelines for proper instrument placement and connection, emphasizing critical grounding.
Procedures for ensuring accurate wind direction and speed readings, including recalibration needs.
Provides formulas for converting raw sensor outputs to wind speed and direction values.
Guidance on component replacement and troubleshooting for long-term performance.
Detailed steps for replacing the wind direction potentiometer when it becomes worn or non-linear.
Steps to replace anemometer bearings if they become noisy or affect wind speed threshold.
Procedure for replacing the larger bearings in the vertical shaft assembly.
Information regarding FCC and Canadian ICES compliance for electromagnetic compatibility.
Details the product warranty period and limitations for defects in materials and construction.
Notes on European CE requirements and the need for shielded cable for EMC Directive compliance.
Illustrates the electrical connections and signal flow for the Wind Monitor.
An exploded view of the Wind Monitor showing all components and their part numbers.
Rotation Specifications| rotation range | 200 to 15, 000 RPM |
|---|---|
| rotation increments | 100 RPM |
| rotation direction | Clockwise or Counter-Clockwise |
Display and Power| display resolution | 1 RPM |
|---|---|
| quartz timebase reference | 0.1 RPM |
| power requirement | 2x9 V (alkaline or lithium) batteries |
| AC wall adapter | 115 VAC (230 VAC with suffix H) |
Rotation Specifications| rotation range | 20 to 990 RPM |
|---|---|
| rotation increments | 10 RPM |
Display and Power| display resolution | 0.1 RPM |
|---|---|
| quartz timebase reference | 0.1 RPM |
| power requirement | 2x9 V (alkaline or lithium) batteries |
| AC wall adapter | 115 VAC (230 VAC with suffix H) |
Angle Specifications| angle range | 0 to 360 degrees |
|---|---|
| angle resolution | 0.5 degree |
Torque Specifications| torque range | 0 to 5.4 gm-cm |
|---|---|
| torque resolution | 0.1 gm-cm |
Torque Specifications| torque range | 0 to 50 gm-cm |
|---|---|
| torque resolution | 5 gm-cm |
To Next Page
