FFLED39 INSTALLATION INSTRUCTIONS
FFLED39-IN-1011
CLEANING & MAINTENANCE
CAUTION: Be sure xture temperature is cool
enough to touch. Do not clean or maintain while
xture is energized.
1. Clean glass lens with non-abrasive glass cleaning
solution.
2. Do not open the xture to clean the LED. Do not
touch the LED.
TROUBLESHOOTING
1. Check that the line voltage at the xture is correct.
Refer to wiring directions.
2. Is the xture grounded properly?
3. Is the photocell, if used, functioning properly?
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
US:Pat D643,147, CA: Pat Pending CN: Pat Pending,
MX: Pat Pending
ACCESSORIES AND
REPLACEMENT PARTS
Chrome Wire Guard: GDFFLED39W
Poly Shield:
GDFFLED39P
Lens & Door Replacement: LFFLED39 (bronze)
LFFLED39W (white)
FFLED39 Cool
FFLED39N Neutral FFLED39Y Warm
To Previous Page
Loading...