RAB Lighting FLEX FLOOD - User Manual

Crucial warnings and recommendations before installing or maintaining the fixture.

Specifies that the fixture should not be installed in a recessed manner.

Details on connecting fixture leads to supply leads, grounding, and insulating unused wires.

Steps for safely installing a lamp, including opening the fixture and closing the door.

Instructions for cleaning the reflector and glass refractor with appropriate solutions.

Common checks for resolving issues such as lamp, wiring, voltage, and grounding problems.

Lists compatible replacement lamps for High Pressure Sodium, Metal Halide, and Fluorescent types.

Instructions on how to adjust the lamp socket for different beam spread patterns.

Guide for mounting the fixture using a slipfitter over a tenon and securing it.

Steps to adjust the fixture's angle using the trunnion mounting mechanism.

Procedure for adjusting the fixture's angle using the swivel arm.

Instructions for setting the fixture to a 0-degree down position, requiring no changes.

Steps for adjusting the fixture to a 30-degree down position using screws and rotation.

Procedure to set the fixture to a 0-degree up position by rotating the inner bracket.

Guide on attaching the outer bracket to weatherproof boxes and securing for strength.

Crucial warnings and recommendations before installing or maintaining the fixture.

Specifies that the fixture should not be installed in a recessed manner.

Details on connecting fixture leads to supply leads, grounding, and insulating unused wires.

Steps for safely installing a lamp, including opening the fixture and closing the door.

Instructions for cleaning the reflector and glass refractor with appropriate solutions.

Common checks for resolving issues such as lamp, wiring, voltage, and grounding problems.

Lists compatible replacement lamps for High Pressure Sodium, Metal Halide, and Fluorescent types.

Instructions on how to adjust the lamp socket for different beam spread patterns.

Guide for mounting the fixture using a slipfitter over a tenon and securing it.

Steps to adjust the fixture's angle using the trunnion mounting mechanism.

Procedure for adjusting the fixture's angle using the swivel arm.

Instructions for setting the fixture to a 0-degree down position, requiring no changes.

Steps for adjusting the fixture to a 30-degree down position using screws and rotation.

Procedure to set the fixture to a 0-degree up position by rotating the inner bracket.

Guide on attaching the outer bracket to weatherproof boxes and securing for strength.