Step 8
Install the top-cap and bolt. Torque the top-cap according to your manufacturer’s instructions. Then, ensure there is no
play in the headset.
Step 9
Adjust the stem so it is aligned with the front wheel. Torque the steerer clamp bolts to the specification marked on the
outer surface of the stem.
Before every ride:
1. Make sure the stem securely clamps the handlebar and the steerer, so that they cannot rotate or slip relative to the
stem. Brace the front wheel between your legs while twisting the handlebar. Make sure the stem does not move
independently from the front wheel.
2. Check the torque for all stem bolts.
To Next Page
Loading...
