Racepak 250-DS-IQ3SL - User Manual

IQ3 Street Logger Dash Installation Manual
IQ3 Street Logger Dash
Installation Manual
IQ3 Street Logger Dash Manual
Racepak, IQ3 Street Logger Dash and V-Net are trademarks of Racepak LLC.
© Racepak LLC

Summary

Disclaimer

Warranty

Manual Summary

Manual Quick View

Provides a quick overview of the manual's layout and sections for easy navigation.

Items Included with the IQ3 Street Logger Dash Display Kit

Lists all components included in the IQ3 Street Logger Dash Display Kit package.

IQ3 Street Logger Dash Features

General Feature Overview

Lists the main functional capabilities and features of the IQ3 Street Logger Dash.

IQ3 Street Logger Dash Displayed Features

Details the specific data points and information the IQ3 Street Logger Dash can display.

Technical Specifications

Outlines the technical specifications including channels, processor, power, and operating conditions.

Hardware Features

External Dimensions

Details the physical dimensions and measurements of the IQ3 Street Logger Dash unit.

External Features - Rear

Details the connectors and mounting points on the rear of the IQ3 Street Logger Dash.

Mounting Dimensions

Provides a template for drilling and mounting the IQ3 Street Logger Dash unit.

Installation Guidelines

Covers general guidelines and requirements for installing the IQ3 Street Logger Dash.

IQ3 Street Logger Dash Wiring Pinout

External Programming Button and Fan Output Wiring Diagram

Illustrates the wiring for external buttons and the fan output control.

External V-Net Sensor Connection (optional add ons)

Explains how to connect additional sensors using the V-Net system.

Factory Default Display Settings

External Programming Buttons

Button Programming Modes

Explains the different modes (Stationary, Moving) for button programming.

General Button Operation (Display and Setup)

Covers basic button functions and how press duration affects operation.

Button Functions in Setup Mode

Lists button functions when the dash is in setup mode for programming.

Oil Pressure, Water and Transmission Temperature Sensor Installation

Oil Pressure Sensor Settings

Details the settings and supported sensors for oil pressure measurement.

Water Temperature Sensor Settings

Covers the settings and supported sensors for water temperature measurement.

Oil Temperature Sensor Settings

Details the settings and supported sensors for oil temperature measurement.

Fuel Level

Custom Fuel Level Calibration Procedure

Step-by-step guide for calibrating the fuel level sensor.

Speedometer Sensor Interface

Speedometer Calibration

Guide for calibrating the speedometer sensor and settings.

Gear Position Indicator Calibration (Manual Transmission only)

Display Clock;Time

OBDII and EFI Interface

Wire Connection

Details the wiring connections for the OBD II and EFI interface.

Adapter harnesses available

Lists available adapter harnesses for connecting to ECUs.

DataLinkII Software Installation

Configuration Files

Stand Alone or with V-Net Sensors

Discusses using configuration files for standalone or V-Net connected systems.

Programming the Display Using the DataLink Software

Com Port Settings

Instructions for configuring COM port settings for PC communication.

Reading;Syncing of the Configuration File

EFI Interface Programming

Programming the Display Pages

Bar Graph (Sweep Tach)

Gear Indicator (center of dash) Gear Position

Remaining Inputs

Programming the Warnings

Example Warning Setup

Shift Lights

Gear Calculation

DataLink II Logging and Downloading

Data Download Path

Explains the flow of data from the logger to the PC via configuration files.

Setting the Correct Time and Date inside Your IQ3 Street Logger Dash

MicroSD Flash Card Reader Installation

Information on installing and using the microSD card reader.

Clearing Data Files from the Memory Card

Procedures for clearing recorded data from the memory card to free up space.

Initiating a Recording with the IQ3 Street Logger Dash data logger

Start Recording Manually on Operator Input (default)

Describes manual recording initiation via pushbuttons.

Start Recording Automatically when threshold is exceeded.

Details automatic recording triggered by exceeding a data threshold.

Recording Data

Explains how recording progresses and ends based on programmed parameters.

Configuring the Record Parameters

Setting the Start Record Channel

Setting the Start Recording Threshold Value

Defines the value a channel must exceed to initiate recording.

Setting the Record Length

Uploading Recorded Data to your PC from the IQ3 Street Logger Dash

Naming and Storing the Uploaded Data

Viewing Real Time Data on your PC

Setting up the Logger Real Time Telemetry Parameters

Entering the DataLink Real Time Telemetry Parameters

Setting up recording parameters for real-time telemetry.

Starting a Telemetry Session

DataLink II Help Files

Dash Info Tab

Maximum Number of Recording VNET Channels allowed

Information on the number of V-Net channels supported for recording.

Record Enable Channel

How to set the channel that triggers data recording.

ECU Type

How to select and configure the Engine Control Unit (ECU) type.

Turn Signal Input Off Delay

Setting the delay for the turn signal indicator when power is removed.

Odometer Input Channel

Configuring the input channel for odometer functionality.

Dim Back Light Channel

Dash Model

Serial #

Firmware Version

Troubleshooting and FAQ

DataLink will not communicate with the IQ3 Street Logger Dash when using the USB programming cable

Steps to resolve communication issues between the PC and the dash via USB.

V-Net Sensor Channels “lock up” from time to time

Addresses issues with V-Net sensor channels becoming unresponsive.

Conclusion

Racepak 250-DS-IQ3SL Specifications