Need help?Do you have a question about the Racepak Ultra Dash Xtreme and is the answer not in the manual?
Lists the various features of the Ultra Dash display unit.
Lists all components included in the Ultra Dash kit.
Lists optional accessories available for the Ultra Dash system.
Guidance on choosing an optimal position for the Ultra Dash unit.
Instructions for physically mounting the Ultra Dash unit.
Explains the function of each connector port on the Ultra Dash.
Details the pinout and wiring for Port A connector.
Details the pinout and wiring for Port B connector.
Instructions for installing various sensors like EGT and water temperature.
Specific steps for installing the jack shaft sensor and collar.
Explains the function and use of the remote switch.
Instructions for connecting and using an external battery.
Guide to adding expansion modules via the V-Net port.
Explains button press types (SHORT, MED, LONG) and their functions.
Lists the different operational modes of the dash.
Details how to enter and navigate the setup mode.
Lists and describes configurable parameters and their options.
Procedure for calibrating the speedometer reading.
Procedure for calibrating the fuel level sensor.
Explains how the dash operates in real-time mode.
How to navigate and view different channels in scroll mode.
How to view minimum and maximum recorded values.
Instructions for entering and using the data recording function.
How to review recorded data directly on the dash.
Explains the different types of warning indicators and their activation.
Procedure for clearing active alpha display warnings.
Steps to install the DataLink software on a PC.
Instructions for installing the software license disk.
How to connect the dash to the PC using the serial cable.
Steps to change settings and configure the dash via PC software.
How to select and edit individual devices and channels in the software.
Explains the fields describing a selected channel.
Describes the function of the online help text area.
How to enter calibration factors for sensors.
How to define chart settings for data visualization.
Explains the list of user-settable options for devices.
How to customize the layout and variables on dash display pages.
How to update configuration files when V-Net devices are added or removed.
Steps to set up data recording parameters like length and triggers.
How to define the duration of data recordings.
How to specify which channel triggers recording.
How to set the value threshold for triggering recording.
How to transfer the configured record parameters to the dash.
How to connect and transfer data using the serial port.
How to name and save transferred data files.
How to configure parameters for real-time data display.
How to set specific parameters for data logging.
Lists the various features of the Ultra Dash display unit.
Lists all components included in the Ultra Dash kit.
Lists optional accessories available for the Ultra Dash system.
Guidance on choosing an optimal position for the Ultra Dash unit.
Instructions for physically mounting the Ultra Dash unit.
Explains the function of each connector port on the Ultra Dash.
Details the pinout and wiring for Port A connector.
Details the pinout and wiring for Port B connector.
Instructions for installing various sensors like EGT and water temperature.
Specific steps for installing the jack shaft sensor and collar.
Explains the function and use of the remote switch.
Instructions for connecting and using an external battery.
Guide to adding expansion modules via the V-Net port.
Explains button press types (SHORT, MED, LONG) and their functions.
Lists the different operational modes of the dash.
Details how to enter and navigate the setup mode.
Lists and describes configurable parameters and their options.
Procedure for calibrating the speedometer reading.
Procedure for calibrating the fuel level sensor.
Explains how the dash operates in real-time mode.
How to navigate and view different channels in scroll mode.
How to view minimum and maximum recorded values.
Instructions for entering and using the data recording function.
How to review recorded data directly on the dash.
Explains the different types of warning indicators and their activation.
Procedure for clearing active alpha display warnings.
Steps to install the DataLink software on a PC.
Instructions for installing the software license disk.
How to connect the dash to the PC using the serial cable.
Steps to change settings and configure the dash via PC software.
How to select and edit individual devices and channels in the software.
Explains the fields describing a selected channel.
Describes the function of the online help text area.
How to enter calibration factors for sensors.
How to define chart settings for data visualization.
Explains the list of user-settable options for devices.
How to customize the layout and variables on dash display pages.
How to update configuration files when V-Net devices are added or removed.
Steps to set up data recording parameters like length and triggers.
How to define the duration of data recordings.
How to specify which channel triggers recording.
How to set the value threshold for triggering recording.
How to transfer the configured record parameters to the dash.
How to connect and transfer data using the serial port.
How to name and save transferred data files.
How to configure parameters for real-time data display.
How to set specific parameters for data logging.
General| Data Logging | Yes |
|---|---|
| USB | Yes |
| Display Type | LCD |
| GPS | Yes |
| Inputs | Analog, Digital |
| CAN Bus | Yes |
| Compatibility | Racepak |
| Connectivity | Bluetooth |
To Next Page
