EasyManua.ls Logo

Rackmount 1000VA - APPENDIX B SPECIFICATIONS

Rackmount 1000VA
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A
PPENDIX B
S
PECIFICATIONS
MODEL KIN-
600
AP/RM
KIN-
1000
AP/RM
KIN-
1200
AP/RM
KIN-
1500
AP/RM
KIN-
2200
AP/RM
KIN-
3000
AP/RM
(UPS
outlets)
600
VA/
360W
1000
VA/
600W
1200
VA/
720W
1500
VA/
900W
2200
VA/
1320W
3000
VA/
1800W
Capacity
(Bypass
outlets)
500VA 500VA 500VA 500VA
(220
~240V
only)
N/A N/A
Voltage +/-25% at line input
INPUT
Frequency 50 or 60 Hz +/-10% (auto sensing)
Voltage (on
battery)
Simulated sine wave at 100V or
110V/115V/120Vor 220V/230V/240V +/- 5%
Frequency
(on battery)
50 or 60 Hz +/- 0.5%
Voltage
Regulation
(AVR)
AVR automatically increase output voltage
15% above input voltage if –9% to –25% of
nominal. AVR decrease output voltage 13%
below input voltage if +9% to +25% of
nominal
OUTPUT
Transfer Time 2/4 milliseconds, including detection time
EMI/RFI filter 10dB at 0.15MHz,50dB at 30MHz
PROTECTION
And
FILTERING
Overload
Protection
UPS automatic shutdown if overload
exceeds 110% of nominal at 60 seconds and
130% at 3 seconds
Unit Input Circuit Breaker
For overload & Short circuit protection
10Base-T Cable
Port
Network(UTP,RJ-45) compatible jacks
Short Circuit UPS output cut off immediately or input fuse
protection
BATTERY Type Sealed, Maintenance-free lead acid
Typical
Recharge Time
8 hours (to 90% of full capacity)
Protection Automatic self-test & discharge protection,
Replace battery indicator
Back-up Time 3– 180 min (depending on computer load)
12