Remote Supervisory Control Output
Verbatim Owner's Manual C-5
M Warning:
Because the devices under control would not normally be operational during
AC power failures, the Output Relay Enclosure does not include battery
backup for the output relays during AC power failures. Upon restoration of
AC power, the outputs will return to the state dictated by the Verbatim
Autodialer.
When the Verbatim Autodialer itself is first turned on, and at certain other
times when a microprocessor reset occurs, all the outputs will be turned ON
for a fraction of a second, before assuming the state dictated by the Verbatim
Autodialer. In some installations this could cause problems, and in such cases
external time delay relays or other measures may be required to prevent
unwanted momentary activation of controlled devices.
MM are the minutes (09 for 9 minutes)
SS are the seconds. Entry of SS is optional.
u To clear the time and date back to 00:00:00 on 01/01/89.
935 7 ENTER
To Next Page
Loading...
