PACKAGE CONTENTS
1 x Weather Station
1 x Remote Sensor
1 x User Manual
1 x DC Adapter
*Alkaline batteries are not included
Sensor Set Up
INSTALLATION
Base station supports up to 3 sensors connection, the sensor
switch is located inside the battery compartment, it can be
switched 1,2,3, matching the info of Channel 1, Channel 2,
Channel 3 that synchronize on the OUTDOOR Dashboard,
install 2 alkaline AA batteries to activate the sensor.
Base Station Set Up
Remove the protective film that is applied to the LCD screen
prior to using the product.
Plugged in with power adapter and use, battery-power is
321
02
4. Place the base station in a dry area, free of dirt and dust. To
ensure accurate temperature measurement, place out of
direct sunlight and away from heat sources or vents.
To Next Page
Loading...
