Radial Engineering Catapult Series - Networking Audio Over Cat 5;6; AES Signal Transmission for Recording

True to the Music
®
Radial Engineering Ltd.
Catapult™ Audio Snake
Shielded CAT 5
10
Using the Catapult to network audio
Use the pre-existing Cat 5 or Cat 6 wiring in the building to network audio
from one room through the walls to another. The XLR connections at each
end make it easy!
Run four AES signals across Cat 5 cable platform
110 Ohm AES signals can easily travel across Cat 5 and Cat 6 Ethernet
cable. Connect to the four Catapult TX4 XLRs for eight channels of audio
for remote recording.
Room 1 Room 2
A/D Converter Audio Interface
Cat 5 Wall Plate