Need help?Do you have a question about the Radial Engineering Catapult Series and is the answer not in the manual?
General| Color | Black |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Type | Audio Cable |
| Connectors | XLR |
| Connector Type | XLR |
| Conductor Material | Copper |
| Impedance | 110 Ohms |
Details TX4M and RX4M modules for mic level splits between mixers.
Details TX4L and RX4L modules for line level isolation and noise reduction.
Explains the ground lift switch and its function for noise elimination.
How to connect non-isolated TX4 and RX4 modules for audio transmission.
Using TX4M/RX4M for splitting mic signals between mixers for stage use.
Using TX4L/RX4L for line level isolation and noise reduction in audio systems.
Using RX4L as a return snake for corporate events to eliminate ground loops.
Using Catapult for stage setups to simplify cabling and reduce setup times.
Using TX4M to split mic signals for monitor and front-of-house consoles.
Using TX4L as a line isolator to eliminate hum and buzz caused by ground loops.
Utilizing Cat 5/6 wiring to network audio between different rooms or locations.
Running AES signals over Cat 5/6 Ethernet cable for remote audio recording.
To Next Page