Radial Engineering Key Largo - Warranty; Specifications

To Next Page

To Previous Page

Key-Largo™

Radial Engineering Ltd.

SPECIFICATIONS

Audio Circuit Type: ........................ Active circuit with audio-grade operational ampliers

Frequency Response: ....................................................................20Hz - 20kHz ±0.5dB

Noise Floor: ..............................................................................................................-91dB

Clip Level - Input: ...................................................................................................+12dBu

Clip Level - Output: ................................................................................................+24dBu

Maximum Gain - Input to Output: ..........................................................................+12dBu

Total Harmonic Distortion: .....................................................................<0.005% @ 1kHz

Input Impedance - Analog Inputs: ...................................................................... 20k Ohms

Input Impedance - FX Return: ..........................................................................50k Ohms

Input Impedance - Volume Return: .................................................................. 485k Ohms

Output Impedance - XLR: ..................................................................................300 Ohms

Output Impedance - 1/4": ..................................................................................450 Ohms

Output Impedance - FX Send: ............................................................................. 1k Ohms

Output Impedance - Volume Send: ...................................................................300 Ohms

General

Power: ......................................................................260mA, 15VDC (center pin positive)

Construction: ............................................................................................. 14-gauge steel

Finish: ............................................................................................... Durable powder coat

Size: ...................................................................................................................................

FCC Approval: ................................................ Complies with section 15 of the FCC rules

Conditions: ............................. For indoor use at temperatures between +5°C and +40°C

Warranty: .................................................................................Radial 3-year, transferable

Specications are subject to change without notice