2
FEATURES
1
2 9
10
11
12
3 4 5 76 8
1.
EFFECTS LOOP MONO: Switches the effects loop from stereo to
mono when pushed in.
2. EFFECTS FOOTSWITCH: Latching footswitch used to turn on or
off the effects loop in order to add echo or reverb when soloing.
3. EFX SEND: Individual controls on each channel are used to set
the desired amount of effect that will be applied to each device.
4. LEVEL CONTROL (1, 2, 3): Used to adjust the input levels of your
three analog keyboards.
5. USB LEVEL CONTROL: Used to adjust the USB audio return
from your laptop.
6. EFX RETURN: Master effects return control, used to optimise the
effects loop signal path.
7. MONITOR OUT: Used to adjust the stage volume for the keyboard
monitors.
8. MAIN OUT: Used to set the Key-Largo output level going to the PA
system.
9. SUSTAIN FOOTSWITCH: Momentary footswitch used to activate
the sustain function on a master keyboard or digital piano.
10. USB ASSIGN: Congures the Key-Largo for live performance use
or as a recording interface.
11. SUSTAIN FOOTSWITCH POLARITY: Enables the Key-Largo
sustain footswitch function to work with various keyboards.
12. MIDI: IN and OUT connections to send & receive MIDI over USB.
To Next Page
Loading...