Need help?Do you have a question about the Radial Engineering PZ-DI and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Ground Lift | Yes |
| Polarity Reverse | Yes |
| Type | Active Direct Box |
| Output | Balanced XLR |
| Power Supply | 48V phantom power |
| Connectors | XLR, 1/4" |
| Weight | 1.5 lbs |
| Input Impedance | 10 MΩ |
| Output Impedance | 150 Ω |
Details the 1/4" hi-Z input, THRU output, and control switches on the input side.
Describes the XLR output, PHASE, GRND LIFT, and 48V phantom power indicators.
Explains the load adjustment switch for optimizing input impedance for various pickups.
Details phantom power requirements and initial control settings for operation.
Illustrates connecting the instrument to the PZ-DI and the PZ-DI to the mixer.
Explains the THRU output and the side access buffer ON/OFF switch functionality.
Details the -15dB PAD, LO-CUT, and HI-CUT filters for signal shaping.
Explains polarity reverse for feedback control and ground lift for hum elimination.
Provides technical specifications and a functional block diagram of the PZ-DI.
Details the 3-year transferable warranty terms and conditions for the PZ-DI.
To Next Page
