Radial Engineering Dragster User Manual

Thank you for purchasing the Dragster, a super-compact device that lets you adjust
the load on your electric guitar pickups for a more natural sound through wireless
systems and pedal chains. Using the Dragster is simple: connect it between your elec-
tric guitar and any bu󰀨ered input such as a guitar pedal or wireless transmitter. The
Dragster doesn’t require any power to operate, and a mounting ange makes it easy
to permanently attach to a pedalboard or even mount on a guitar strap. A single dial
adjusts the load on your pickups, allowing you to experiment with the amount of Drag
applied for the perfect tone.
Dragster
Pickup Impedance Control

Radial Engineering Dragster Specifications

General

Technology	Passive
Output Impedance	150Ω
Frequency Response	20Hz - 20kHz
Weight	0.5 lbs
Input Impedance	1 MΩ
Inputs	1/4" Jack
Power Supply	Not required (passive)
Features	Load correction

Summary

Dragster Pickup Impedance Control

Quick Start Guide

Use Dragster with Wireless System

Connect the Dragster between an electric guitar and a wireless transmitter for optimal sound.

Warm Tone Through Pedal Chain

Integrate the Dragster into a pedal chain to adjust pickup load and enhance tone.