22
Declaration of Electromagnetic Compatibility (EMC)
FSD requires special precautions regarding EMC and needs to be installed and put into
service according to the EMC information provided in the accompanying documents�
FSD complies with international standards for:
Electromagnetic Emissions Levels.
FSD is intended for use in the electromagnetic environment specified below.
The customer/user of FSD should assure that it is used in such an environment.
Emissions Test Compliance Electromagnetic Environment - Guidance
RF emissions
CISPR 11
Group 1 FSD uses RF energy only for its internal function. Therefore,
its RF emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B FSD is suitable for use in all establishments, including
domestic establishments and those directly connected to
the public low-voltage power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
Table 1: Electromagnetic Emissions Levels Compliance
To Next Page
Loading...