MAINTENANCE INSTRUCTIONS
32
5.2 Accessing the parameters menu
To modify the preset values of the parameters reported in the previous table, open the parameter
settings menu as follows:
1.
Place mode selection button ‘ ’ in OFF position;
2.
Keep pressed ‘ ’ and ‘ ’ buttons simultaneously and wait
for ‘P 00’ to appear on the display;
3.
Release buttons ‘ ’ and ‘ ’;
4.
Use ‘ ’ and ‘ ’ buttons of heating temperature
setting to select the parameter to modify;
5.
Press mode selection button ‘ ’ and release it: The
display will indicate the value of the parameter to modify.
Adjust the value of the parameter using the procedure described in the following pages.
OFF
P00
P00
P01
To Next Page
Loading...
Need help?
General
