Radient RC Ascend - User Manual

WWW.RADIENTRC.COM
Simple
•
Capable
•
Safe
Safe
Peak
Safe
Start
• Entire contents ©2014 Radient RC.
• Before using your product, review all documentation and
inspect the products carefully. If for some reason you decide it
is not what you wanted, then do not continue with unpacking,
setup or operation of your product. Your local hobby dealer
cannot accept a product for return or exchange after partaking
in actions that produce wear and tear.
• Product specifications are subject to change without notice.
Due to ongoing development, the actual product may vary from
images shown.
• This product contains chemicals known to the State of
California to cause cancer and birth defects or other reproduc-
tive harm.
• This product is not a toy! (14+) Recommended for ages 14
and up. Adult supervision required for ages under 18 years old.
Contains small parts, keep out of reach of children 3 years of
age and younger.
Input power
AC 100-240V @50-60Hz
DC 12-15V
Internal DC switching power supply 50W with cooling fan
Charge current rate
LiFe/Ion/Po
2s
(6.6/7.2/7.4V)
0.1-6A
3s
(9.9/10.8/11.1V)
NiCd/MH 1-8 cell
Current drain for balance port 300mAh
Output connector HCT-Plug to JST-Mini adapter
Integrated balance plug JST-XH (2s-3s)
Weight 350g
Dimensions 161x105x60mm

Summary

Physical Features of the Ascend Charger

Backlit LCD Display

Displays Safe Start menu system, charge status and charge summary.

General Charging Precautions

General Safety Warnings

Provides crucial safety advice for operating the charger and handling batteries safely.

Tips for Safe Operation

Offers practical advice for maximizing safe usage and preventing damage during charging.

Safe Start Menu and Software Features

Safe Start Logic

Explains the charger's safety logic and default LiFe charge mode for secure operation.

Charge Rate Calculation Modes

Details options for setting charge rate based on capacity or current.

Tools Section Overview

Accesses diagnostic and monitoring functions like Volt Meter and Balance Meter.

Charging LiPo, Li-Ion, and LiFe Batteries

Charging NiCd and NiMH (NiXX) Batteries

Step-by-Step Charging Procedure

Detailed guide on connecting the battery and initiating the NiCd/NiMH charge cycle.

Troubleshooting Guide

Connection Errors

Resolving issues related to disconnected leads, reverse polarity, and balance plug connections.

Battery Voltage Errors

Addressing problems with battery voltage being too high or too low for charging.

Input Power and Temperature Issues

Solutions for low input voltage, overheating, and unresponsive charger states.

Index: Understanding Battery Terms

Understanding C Ratings

Explains C ratings for calculating safe charge and discharge currents.

Radient RC Ascend Specifications

General

Charge Current	0.1-10.0A
Charge Power	100W
Discharge Power	10W
Charging Ports	1
Battery Types Supported	LiPo, LiFe, NiMH, NiCd, Pb
Display	LCD
Protection Features	Over Temperature Protection