48
49
21
Put the battery in place according to the
illustration.
Locate the three spring-operated button
holes.
Board assembly
– The Battery
BOARD PREPARATIONS BOARD PREPARATIONS
WARNING!
If you suspect that the battery connector
has been in contact with water, or if the
battery in any way looks damaged, do not
connect the battery to the board! Please
contact Radinn immediately for more
information.
Note:
The jetboard battery weighs approx 20
kilograms. We recommend that two
persons lift the battery in place.
3
Push down the spring-operated button,
and line up the spring screws with the
thread, before screwing the lid shut.
Make sure the screws are sealed tightly.
To Next Page
Loading...