Radio Shack 12-1631 - User Manual

OWNER’S MANUAL — Please read before using this equipment.
©
2001 RadioShack Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
Dual Alarm AM/FM Clock Radio
CONNECTING AC POWER
Plug the clock radio’s power cord into a
standard AC outlet. The display lights.
Caution:
The clock radio’s AC power cord is
equipped with a polarized plug to prevent
electric shock. One blade on the cord’s plug
is wider than the other and the plug only fits
an outlet one way. If you can not easily insert
the plug, turn it over and try again. Do not
force it.
INSTALLING A BACK-UP
BATTERY
If AC power fails, the clock radio’s Battery
Sentinel back-up power system continues to
operate the clock for up to 8 hours with the
display turned off to conserve power. This
lets the alarm sound for at least 10 minutes
at the preset time, even if AC power fails.
Your clock radio requires a 9-volt battery (not
supplied) for back-up power. For the best
performance and longest life, we recom-
mend a RadioShack alkaline battery.
Caution:
Use only a fresh battery of the re-
quired size and recommended type.
1. Press the battery compartment cover’s
tab, then lift off the cover.
2. Snap the battery onto the connector and
place it in the compartment.
3. Replace the cover.
When the BATTERY SENTINEL icon
¢
#
ap-
pears, replace the battery.
Warning:
Dispose of old batteries promptly
and properly. Do not bury or burn them.
Caution:
Always remove an old or weak bat-
tery. Battery can leak chemicals that can de-
stroy electronic parts.
WARNING:
To reduce the risk of fire or
shock hazard, do not expose this product to rain
or moisture.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
This symbol is intended to alert
you to the presence of uninsu-
lated dangerous voltage within
the product’s enclosure that might
be of sufficient magnitude to con-
stitute a risk of electric shock. Do
not open the product’s case.
This symbol is intended to inform
you that important operating and
maintenance instructions are
included in the literature accom-
panying this product.
!
!

Radio Shack 12-1631 Specifications

General

Brand	Radio Shack
Model	12-1631
Category	Clock Radio
Type	Digital
Display	LED
Power Source	AC
Snooze Function	Yes
Sleep Function	Yes
Alarm Type	Buzzer/Radio
Radio Band	AM/FM
Backup Battery	9V

Summary

Connecting AC Power

AC Power Connection & Safety

Connects the clock radio to AC power and details shock hazard warnings.

Installing a Back-Up Battery

Battery Installation and Replacement

Guides users on installing a 9-volt battery for backup power and when to replace it.

Setting the Time

Time and Day Setting Procedure

Step-by-step instructions for setting the current time and day of the week on the clock radio.

Using the Alarms

Alarm Setup and Selection

How to set and choose between alarm 1 (AL1) or alarm 2 (AL2), including daily or weekday options.

Using the Interval Timer

Timer Duration and Activation

Instructions for setting the interval timer duration and starting the countdown.

Using Sleep

Sleep Timer Functionality

Details how to set the sleep timer to turn off the radio automatically.

Resetting the Clock

Clock Reset Procedure

Steps to reset the clock radio if it locks up or malfunctions.

Using the Radio

Radio Operation and Tuning

Instructions on turning on the radio, selecting bands, tuning stations, and adjusting volume.

The FCC Wants You to Know

FCC Compliance and Interference

Information regarding FCC rules, compliance, and potential radio interference issues.

Care

Product Care and Maintenance

Guidelines for keeping the clock radio clean, dry, and in good working condition.

Specifications

Technical Specifications

Lists key technical specifications of the clock radio, including bands, power, and dimensions.

Limited Ninety-Day Warranty

Warranty Information

Details the limited ninety-day warranty, including coverage, exclusions, and service procedures.