29
The radio is not
responding properly
to NWS weather alert
broadcasts.
Make sure you programmed
the correct FIPS code(s) into
the Weatheradio’s memory.
See “Programming the Weath-
eradio” on Page 16.
Make sure
PROGRAM/OPER-
ATE
is set to
OPERATE
.
No weather broad-
cast when you press
WEATHER
.
Make sure the telescoping
antenna is fully extended. See
“Using the Built-In Antenna” on
Page 14.
Make sure the Weatheradio is
set to the NOAA channel that is
being broadcast in your area.
See “Programming the Weath-
eradio” on Page 16.
Problems Suggestions
12-251.fm Page 29 Tuesday, March 14, 2000 12:40 PM
To Next Page
Loading...
