What to do if my Radio Shack Radio is not responding properly to NWS weather alert broadcasts?
First, ensure that the correct FIPS codes are programmed into the memory. If possible, move the radio closer to the broadcast source. Also, make sure the radio is set to the NOAA channel being broadcast in your area. Finally, if the backup battery becomes weak, test your radio’s reception periodically, and replace the battery if the tone does not sound.
How to fix a Radio Shack Radio with no power?
Ensure that the AC adapter is correctly connected to the radio or that a backup battery is installed.
What to do if my Radio Shack Radio displays 'CHECK OPERATION'?
If 'CHECK OPERATION' appears, it means the radio has not received a SAME alert signal for about one week. To resolve this, make sure the FIPS codes stored in memory are correct.
What to do if Radio Shack Radio responds to weather alerts for areas not covered by stored codes?
Ensure the radio is not set to ALL LOCATION or TRAVEL mode.
Why does my Radio Shack Radio's alert tone sound intermittently?
The radio constantly monitors the channel you set it to. This is not a malfunction.
What to do if my Radio Shack Radio only responds to one FIPS code?
Make sure the radio is set to MULTIPLE LOC mode and that the FIPS codes stored in memory are correct.
What to do if my Radio Shack 12-259 Weather Radio is not responding to weather alert broadcasts?
First, ensure that the correct FIPS codes are programmed into the memory. If that's not the issue, you might be out of the broadcast range, so try moving the weather radio closer to the broadcast source. Also, verify that the weather radio is set to the NOAA channel being broadcast in your area. Finally, a weak backup battery can cause this issue; test the reception and replace the battery if the tone does not sound.
What does 'CHECK OPERATION' mean on my Radio Shack 12-259 Weather Radio?
The 'CHECK OPERATION' message appears because the weather radio is broadcasting but hasn't received a SAME alert signal for about one week. To resolve this, make sure the FIPS codes stored in memory are correct.
Why does my Radio Shack 12-259 Weather Radio only respond to one FIPS code?
If multiple FIPS codes are stored but the weather radio only responds to weather alert broadcasts for one code, ensure that the weather radio is set to MULTIPLE LOC mode and that the FIPS codes stored in memory are correct.
Why is my Radio Shack 12-259 responding to alerts outside my FIPS codes?
If the weather radio responds to weather alert broadcasts for areas not covered by the stored FIPS codes, ensure that the weather radio is not set to ALL LOCATION or TRAVEL mode.
Covers initial setup including batteries, power, and accessories.
Guides users through setting alarms, clocks, channels, alerts, and location codes.
Explains how to receive alerts, monitor signal, and manage device modes.
Provides solutions for common operational problems and issues.
Details FCC compliance and user guidelines for interference.
Lists technical specifications and recommended maintenance practices.
Outlines the product's warranty coverage and terms.
General| Type | Weather Radio |
|---|---|
| Brand | Radio Shack |
| Model | 12-259 |
| Battery Type | AA |
| Weather Band Channels | 7 |
| Antenna | Telescopic |
| Power Source | Battery |
To Next Page