18
Programming the Weatheradio‚
9. When you finish programming the
Weatheradio
, press MENU or wait
about 45 seconds without pressing
any key.
ENABLING/DISABLING A LERT
T
ONES
The Weatheradio
automatically
sounds an alert tone during specific
types of weather alerts. You can turn
the alert tone on or off for each of these
alerts. For example, you can turn off
the alert tone for a volcano warning if
you do not live near a volcano.
1. Press
MENU. Then press e or d
until
TONE DEFEAT appears.
2. Press g.
3. Repeatedly press e or d until the
type of alert you want to enable or
disable (
WARNING, WATCH,
STATEMENT, or TEST) appears.
4. Press g.
5. If you selected
WARNING, repeatedly
press e or d to select one of the
following specific alerts
To Next Page
Loading...
