Radio Shack 12-259 - Setting the Alarm; Setting the Clock

8
Programming the Weatheradio‚
5. Press g. AM or PM flashes.
Repeatedly press e or d to make
your selection.
6. Press g to confirm. One long beep
sounds. Press
MENU to exit.
At the set alarm time, the
Weatheradio

generates an alarm.
Press any button to stop the alarm.Ô
SETTING THE CLOCK
1. Press MENU. Then press e or d
until
SET CLOCK and Ì appear.
2. Press g. The hour digits flash.
Press e or d to set the hour.
3. Press g. The minute digits flash.
Repeatedly press e or d to set the
minutes.
4. Press g.
AM or PM flashes.
Repeatedly press e or d to
choose the desired format.
5. Press g again to store the time. A
long beep sounds to confirm the
entry.
6. Press
MENU to exit. Ô
Ô NOTES Ô
Setting the Alarm
• The alarm duration
is one hour under
standby mode and
is only five seconds
during NWS alert
broadcast.
Setting the Clock
• Hold down MENU
to view the clock
time during NWS
alert broadcast.