5
Preparation
3. Release WX and press MENU.
DEFAULT ON appears briefly, and
then
USER SETUP appears.
4. Remove batteries and/or
disconnect AC power. Reinsert to
begin use.
TURNING POWER
O
N AND OFF
Press and hold down G for two
seconds to turn the Weatheradio
on
and off. Ô
ADJUSTING VOICE AND
T
ONE VOLUME
1. Press WX to turn on broadcast.
2. Repeatedly press e or d to adjust
the volume to the desired listening
level.
VOLUME: and the volume level
appear.
3. Press
WX to turn off the weather
broadcast.
4. Repeatedly press e or d to adjust
the alert tone volume to the
desired listening level.
TONE VOL:
and the alert tone level appear.
Ô NOTE Ô
If power is off, weather
alert messages are not
detected.
To Next Page
Loading...
Need help?
General
