Radio Shack 1201849 - Setting the Alarm

Setting the Alarm
1. With the radio o, turn on alarm mode by
pressing ALARM (the AM/FM button) once.
2. Press PRESET to enter alarm set mode.
3. Use the CLOCK ADJUST (the TUNE
buttons) up or down to set the alarm hour.
Press PRESET to conrm your selection.
4. Use the CLOCK ADJUST (the TUNE buttons)
up or down to set the alarm minute. Press
PRESET to conrm your selection.
5. Use the CLOCK ADJUST (the TUNE
buttons) up or down to toggle between
radio alarm mode (displayed as rAd) and
buzzer alarm mode (displayed as bU2).
Press PRESET to conrm your selection.
The radio exits alarm set mode.
Notes:
• Alarm set mode will exit automatically if no
buttons are pressed for 2 seconds.
• When set to radio alarm mode, the radio will
automatically tune to the last station you were
listening to when the alarm is triggered.
• Under buzzer alarm mode, the radio will make
a beeping sound when the alarm is triggered.
• To toggle the alarm o/on, press ALARM (the
AM/FM button) from the clock display.
• When the alarm is set to on, the alarm icon will
display in the top right corner of the display.
8