Radio Shack 15-2505 - Routing Cables; Connecting Devices

4
• Tokeepexposedcabletoaminimum,youcanalsoplace
theamplierinyourattic.
• Topreventinterference,donotplacetheamplierwithinsix
inchesofanyotherelectronicdevice.
2 Route cables
Routea75-ohm(RG-6orRG-6QS)coaxialcable(notsupplied)
fromtheampliertoyourinputsourceandreceiver.Follow
thesehintswhenroutingcable:
• Useonlyasmuchcableasisnecessarytoreachfromthe
ampliertotheinputsourceandreceiver.
• Donotroutecableswheretheymightbecut,crimped,or
crushedbynormalactivities.
• Forbestappearance,routethecablethroughtheatticand
walls,andterminateinawallmountboxwithanF-connector
(notsupplied).
3 Connect devices
INPUT
OUTPUT
Power LED
GAIN MIN/MAX