Radio Shack 15-316 - Power Connection

3
 Connecteachdevice’sS-videooutputstoasetofINPUT
(1-4)S-videojacksontheswitchbox.
2. ConnecttheTVormonitor’sY/Pb/Prcomponentvideo
inputstoOUTPUT Y/Pb/Prcomponentvideojacks.
 – OR –
 ConnecttheTVormonitor’scompositevideoinputsto
OUTPUTcompositevideojacks.
 – OR –
 ConnecttheTVormonitor’sS-video inputsto
OUTPUT S-videojacks.
Power
ConnectthesuppliedACadapter’sbarrelplugtotheselector
switch’sDC 12Vjack,thenconnecttheadapter’sACplugtoa
standardACoutlet.
w Caution:
• YoumustuseaClass2powersourcethatsupplies12V
DC and delivers 300 mA. Its center tip must be set to
negative and its plug must fit the switchbox’s DC 12V jack.
The supplied adapter meets these specifications. Using
an adapter that does not meet these specifications could
damage the switchbox or the adapter.
• DonotplacetheselectorswitchonthetopofaTVorother
electrical appliance. Electromagnetic interference from the
TV might distort the sound from any devices connected to
the switchbox.