12
Important:
The FCC does not al-
low you to send a continuous tone
for more than 10 seconds at a time
on FRS frequencies. Do not hold
down
CALL
for more than 10 sec-
onds.
Set
QUIET
to the desired code to
provide greater communication
flexibility. See “Quiet Codes” on
Page 14.
Press
8
to scan up through the
channels, or
9
to scan down
through the channels.
Hold down
PUSH TO TALK
and
speak into
MIC
to transmit. When
you finish your transmission, re-
lease
PUSH TO TALK
.
BUSY
ap-
pears when a call is being received.
Hold down
MON
(monitor) (
SHIFT
)
to hear everything on a channel,
even weak transmissions. Release
MON
to turn auto-squelch back on.
21-1825.fm Page 12 Friday, March 3, 2000 12:32 PM
To Next Page
Loading...
