Setting Home ID
Home ID data allows you to enter the ID number that will appear on receiver radio as you
communicate with them. User can select Home ID number 1-16.
1. Set the Transmitter and Receiver in the same channel (and same quiet code, if you select one)
2. Hold down the Receiver’s FUNC key and press CALL key to enter Setting Home ID mode.
Release all key and then press UP or DOWN key to select your desired Home ID number.
3. Press PTT key to stored the setting.
Note:
• If no key pressed within 20 seconds in Setting Home ID mode, the radio will
automatically exit without saving.
• If Home ID is changed, the radio will automatically reset the Caller ID number to Group
Call.
Setting Caller ID
Caller ID data allows you to enter the receiver’ radio ID number that you want to call. Receiver’s
radio only receive the Call when the Caller ID data is matched with it Home ID. User can select
Caller ID number 1-16 or Group Call.
1. Hold down Transmitter’s CALL key until the Call ID number flashes on the display, press UP or
DOWN key to select the receiver’s home ID number or GROUP option. (If you select receiver’s
home ID number 1 ~ 16, you can only send a page to one user or several users setting with the
same ID home number, if you select GROUP option, you can send a page to all users.).
2. Press PTT key to stored the setting.
Note:
• If user presses UP or DOWN key to change Caller ID number and the number is equal
to the Home ID. Then the LCD will display the next Caller ID number in order to prevent
any match of Home ID and Caller ID.
Call Melody
In Transmitter’s radio, the call melody will generate after the Call ID data is sent. The Call melody
is depends on the Call ID number. The Call tone melody map is state as following Table.
Call Melody No. 1 2 3 4 5
ID
Call ID =
Group Call
Call ID =
1~4
Call ID =
5~8
Call ID =
9~12
Call ID =
13~16
In Receiver’s radio, the call melody will generate after the Call ID data is received. The Call
melody is depends on the Sender ID number. The Call tone melody map is state as following
Table.
Call Melody No. 1 2 3 4 5
ID Group Call
Sender ID =
1~4
Sender ID =
5~8
Sender ID
= 9~12
Sender ID
= 13~16
To Next Page
Loading...
