Connections
11
Follow these steps to connect two speakers in
parallel.
1. Connect both speaker’s negative (-) terminals
to each other. Then, connect both wires to the
amplifier’s COM terminal.
2. Connect both speakers’ positive (+) terminals
to each other. Then, connect both wires to the
amplifier’s speaker terminal (4
Ω, 8 Ω, or 16 Ω)
that matches the total speaker impedance.
%100'%6+0)(17452'#-'45+0
5'4+'52#4#..'.%1/$+0#6+10
Follow these steps to combine series and parallel
combinations
±.
1. Group the four speakers into two pairs.
2. Connect each pair of speakers in series. If you
connected 8-ohm speakers, the total
impedance of each pair is 16 ohms (8+8 = 16).
±016'±
If each of the four speakers
is 8 ohms, the total speaker
impedance of the combined
series/parallel connection
described at right is also 8
ohms. Likewise, the total
speaker impedance is 4 or
16 ohms if the speakers are
4 or 16 ohms, respectively.
To Next Page
Loading...
