3
Features
ˆ
Features
Your new RadioShack Digital Sound Lev-
el Meter precisely measures area noise
and other sound levels. The meter’s digital
design and special measuring features,
such as the bargraph and date hold, en-
sure pinpoint accuracy for checking an
acoustic environment. The meter is light-
weight and easy to operate.
Note:
This meter should be used for
home/hobbyist use only. This meter
does not meet the requirements set
forth by the American National Stan-
dards Institute (ANSI), Standard S1.4.
Your meter also has these features:
3-Digit Liquid Crystal Display
— makes
it easy to read sound measurements.
21- Dot Analog Bargraph
— gives you a
visual representation of the measured
sound.
Mode/Condition Indicators
— show you
the current mode and status of the meter.
To Next Page
Loading...
