6
Installing the Battery
1. Set
RANGE
to
OFF
.
2. Remove the bat-
tery compartment
cover by pressing
in both sides and lifting off the cover.
3. Install the battery as indicated by the
diagram marked in the compartment.
Place the battery over the red ribbon
to make it easy to remove the battery
later.
4. Replace the battery compartment
cover.
Notes:
• When you are not using the meter,
set
RANGE
to
OFF
.
• If you will not use the meter for a
week or more, remove the battery.
• When the battery becomes low,
BATT
appears on the display.
To Next Page
Loading...
