8
Connecting a Second Audio Source
Use a 3.5mm audio patch cable (not included) to connect a
second audio source to the Control Pod’s AUX jack.
Connecting Headphones
Connect your headphones (not included) to the Control
Pod’s * jack for private listening.
Troubleshooting
If the speakers produce no sound:
• Make sure all connections are correct.
• If connected to a computer, make sure you have
connected the pod to the computer's audio output jack.
• If the power indicator does not light when you turn on the
Control Pod, check the power outlet.
• Make sure the Volume Control is not turned to MIN.
The speaker sound is distorted:
Adjust the volume at the audio source. Then adjust the
speaker volume.
To Next Page
Loading...
